View Single Post
John_Schaller John_Schaller is offline
Junior Member
Join Date: May 2003
Posts: 1
#1 (permalink)  
Old 05-07-2003, 03:25 PM
Default Cannot boot after V4 Install on two diff systems

I have downloaded V4.0 and burned it to a CDROM. It boots and appears to install correctly. When I rebooted after the install I got LI on the display and the system locked up. I reinstalled to the same machine with the same result. I then installed to a completely different machine. Again, the install appeared to go correctly but after an LI on the screen on reboot the system locked up. Both of these machines have successfully installed and run smoothwall. The first machine is a Pentium II 400 w/ 256MB. The second is an older IBM P200+ with 64MB. Any suggestions appreciated.
Reply With Quote