Astaro User Bulletin Board
Go Back   Astaro User Bulletin Board > Astaro Gateway Products > General Discussion

Welcome to the Astaro User Bulletin Board.
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Reply
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old 01-23-2007, 12:50 AM
Member
 
Join Date: May 2004
Posts: 55
Default New home user licensing more limited on V7..

And still no power users license... its been a good last 4 years, but now I must bow out...

Well, I read the release notes, and it looks like 10 user/10 ip addresses, with 1000 concurrent connections... however, it looks like they can shut down connections when it goes above %110 of usage on the 1000 user license now, and I am wondering if this will also happen with the 10 user license....

"Home-Use Licenses
We will continue offering a Home-Use package. The new V7 package will be free of charge and will now include the base license, all subscriptions and Astaro Up2Date. But it will be limited to 10 IPs/10 Users, and 1000 concurrent connections.
Note: Astaro will provide no support to home users and they need to agree to participate in Astaro’s Threat Research Network."

and this from the 1000 user section...

Within ASG software the limits for maximum IPs / users are now enforced in the following
way:
• The administrator will get an email notification if the IP limit is reached.
• At that time new IPs / users will still be accepted up to a maximum of 110%
of the licensed number of IPs (grace limit)
• If the grace limit is reached no more IPs / users will be accepted
Reply With Quote
  #2 (permalink)  
Old 01-23-2007, 01:10 AM
RFCat_vk's Avatar
Wizard
 
Join Date: Aug 2005
Location: Victoria, Australia
Posts: 2,554
Thumbs down

Hoby,
the 10 user/10IPs is about as clear as mud in the proverbial beer bottle.

Does that mean 10 IP through the firewall?

Does that include 10 IPs that only use the proxies?

Does that mean 10 IP defined in network definitions?

Does that mean 10 IPs defined in DHCP?

At the moment under v6.933 it counts the internal interface and nearly all but not all IPs on the network.

Not very well worded.

Ian M
__________________
Home Power User unlimited licence - v7.50x - AMD X2 5050e with 2gb,1 intel NIC, the onboard NIC and netgear gs108t with vlans.
Reply With Quote
  #3 (permalink)  
Old 01-23-2007, 01:12 AM
Gert Hansen's Avatar
Wizard
 
Join Date: Nov 2000
Location: Karlsruhe, Germany
Posts: 1,242
Default

Hi there,

just as a small reminder.

The home use license was always limited to max. 10 IP's behind the firewall. So there is no change in that.

We even extended the home use licenseand give you guys Web- and Email Filtering as well es Email-Encryption completly free, inluding instant pattern updates.

This means free Anti-Virus, free Anti-Spam, free URL-Filter, ... etc.

The 10 means ten devices behind the firewall communicating with or through the asg device. We only count the last seven days.

regards
Gert
Reply With Quote
  #4 (permalink)  
Old 01-23-2007, 02:12 AM
Simon Shaw's Avatar
Aussie moderator.
 
Join Date: Jun 2001
Location: Perth, Western Australia
Posts: 2,628
Default

I thought license counting was always connections THROUGH the firewall? Not one's terminating at the proxies for instance?

Not too fussed, but this has now changed I take it?
__________________
Simon Shaw
Systems Manager
Micromine PL

Intel 2.66GHz Quad Core, 4GB (2 x 2GB) PC-6400 800Mhz 4-4-4-12, WD 300GB 10K RPM VelociRaptor, Intel Pro/1000 Quad Port PCI-X
http://www.sputcorp.com/
Reply With Quote
  #5 (permalink)  
Old 01-23-2007, 03:24 AM
RFCat_vk's Avatar
Wizard
 
Join Date: Aug 2005
Location: Victoria, Australia
Posts: 2,554
Default

Gert,
I don't have a problem with the 10 user licence as long as it is through the firewall. There are times when I end up with about 14 IP addresses on the internal side of the firewall, but only 7 or 8 addresses actually traverse the firewall. The others use it for it DHCP and NTP.
My print servers static IP from ASG
WAP - NTP from ASG

It is also a bit mean to include the internal interface in the licence count.

Ian M
__________________
Home Power User unlimited licence - v7.50x - AMD X2 5050e with 2gb,1 intel NIC, the onboard NIC and netgear gs108t with vlans.
Reply With Quote
  #6 (permalink)  
Old 01-23-2007, 10:22 AM
simby's Avatar
Senior Member
 
Join Date: May 2006
Posts: 124
Default

how many Concurrent Connections do we have in v7 ?
how can i order free v7 license home.

Thanks for new add on.

Thanks for new manual

p.s.: on demo7 pager is old version beta 6.915 . Can you please ubdate.
__________________
Asatro Internet Security 6.312
H. info: 3.2Ghz Intel P4 541+, 4096MB, 80GB/7.200 rpm/min SATA
N. info: 2x Realtek n. 10/100, Dlink 24x switch, FTTH (Optical fibers) 10 | 10Mb

I use IPv7 now... It's pretty much IPv6, but the headers contain p0rn. Saves bandwidth.

Last edited by simby; 01-23-2007 at 10:30 AM.
Reply With Quote
  #7 (permalink)  
Old 01-23-2007, 04:13 PM
Member
 
Join Date: Apr 2006
Location: Miamisburg, OH
Posts: 78
Default

Do I understand home use correctly for v7.
Per Gert:
We even extended the home use licenseand give you guys Web- and Email Filtering as well es Email-Encryption completly free, inluding instant pattern updates.

This means free Anti-Virus, free Anti-Spam, free URL-Filter, ... etc.

And only 1000 concurrent connections where v6 is 32,000, lost on this?
I am okay with 10 ip's, but connections?
Maybe I am just misunderstanding this.
Reply With Quote
  #8 (permalink)  
Old 01-23-2007, 04:26 PM
simby's Avatar
Senior Member
 
Join Date: May 2006
Posts: 124
Default

This sux!! Why have you limited 1000 curent connections!? Remove free antivirus , antispam and fee url filter and give us more connections. Have you try to run bittorrent ? What about dos and other attack?

And then, who will be reported for new bugs? Your pro. user, who is pay for working product?

What is wrong with you? This is stupid!!!

i hope i did t vote for you for this stupid new astaro 7 license!!

p.s.: when will you ubgrade this licens registration?
__________________
Asatro Internet Security 6.312
H. info: 3.2Ghz Intel P4 541+, 4096MB, 80GB/7.200 rpm/min SATA
N. info: 2x Realtek n. 10/100, Dlink 24x switch, FTTH (Optical fibers) 10 | 10Mb

I use IPv7 now... It's pretty much IPv6, but the headers contain p0rn. Saves bandwidth.

Last edited by simby; 01-23-2007 at 04:44 PM.
Reply With Quote
  #9 (permalink)  
Old 01-23-2007, 04:57 PM
Senior Member
 
Join Date: Mar 2006
Location: UK
Posts: 120
Default

Quote:
Originally Posted by mech9122 View Post
Do I understand home use correctly for v7.
Per Gert:
We even extended the home use licenseand give you guys Web- and Email Filtering as well es Email-Encryption completly free, inluding instant pattern updates.

This means free Anti-Virus, free Anti-Spam, free URL-Filter, ... etc.

And only 1000 concurrent connections where v6 is 32,000, lost on this?
I am okay with 10 ip's, but connections?
Maybe I am just misunderstanding this.
I think you'd need to be doing something odd to need more than 1000 concurrent connections with only 10 ips! I wouldn't worry about it.
I have over 300 users accessing the net and I rarely go over 1500 connections.
__________________
2x Astaro ASG320 in Cluster Mode (Active/Active)
normally at latest patch level.

Last edited by Godsbrother; 01-23-2007 at 05:07 PM.
Reply With Quote
  #10 (permalink)  
Old 01-23-2007, 05:33 PM
simby's Avatar
Senior Member
 
Join Date: May 2006
Posts: 124
Default

read my post. We are home users, and we dont have p2p restriction. Have you ever have a security attack, dos and other? Have you?! Have you check status?
__________________
Asatro Internet Security 6.312
H. info: 3.2Ghz Intel P4 541+, 4096MB, 80GB/7.200 rpm/min SATA
N. info: 2x Realtek n. 10/100, Dlink 24x switch, FTTH (Optical fibers) 10 | 10Mb

I use IPv7 now... It's pretty much IPv6, but the headers contain p0rn. Saves bandwidth.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT. The time now is 06:44 AM.

 

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2010, Jelsoft Enterprises Ltd.


These pages are specifically maintained for the discussion of firewall issues within the Open Source community, and might already reflect new alpha/beta releases under development. Please refer to our product specifications for the functionality of the actual release. Discussions of new/enhanced functionality does not constitute a commitment of Astaro, to integrate this functionality into future releases. issues within the Open Source community, and might already reflect new alpha/beta releases under development. Please refer to our product specifications for the functionality of the actual release. Discussions of new/enhanced functionality does not constitute a commitment of Astaro, to integrate this functionality into future releases.