Astaro User Bulletin Board
Go Back   Astaro User Bulletin Board > Astaro Gateway Products > Hardware, Installation, Up2Date, Licensing
Reload this Page [7.403] WAN NIC Down after up2date to 7.403!
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read

Welcome to the Astaro User Bulletin Board.
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Page 2 of 6 1 2 34 Last »
Reply
 
LinkBack Thread Tools Display Modes
  #11 (permalink)  
Old 06-09-2009, 10:23 PM
Moderator
  
Join Date: Jul 2001
Location: southern California
Posts: 5,135
Default
It looks like MSI has a new BIOS, 1.10...
MSI Global ? Computer, Laptop, Notebook, Desktop, Mainboard, Graphics and more

I could try that later, but the change list doesn't have anything about NICs.

Barry
__________________
http://DealBert.net
Home & business end-user since v1.x
  • ASL 6.3x, HP DL145 Dual Opteron, 1GB RAM, 6 gigE NICs, 50-IP Platinum License
  • ASL 7.3x, Dell PE1550 Dual PIII 1GHz, 1GB RAM, 2 NICs, 50-IP Platinum License
  • ASL 7.5x, 17-watt fanless mini-ITX system: MSI IM-945GSE-A Atom n270, 2GB RAM, Morex T3310 case. 2 Intel GigE, 3 VLANs. 80G 5200rpm 2.5" HD
    Netgear GS108T gigE VLAN switch & Linksys WRT54G WAP
    Total network infrastructure: 27 watts. 100-IP Home User. FiOS 10mb/2mb
Reply With Quote
  #12 (permalink)  
Old 06-09-2009, 10:23 PM
Junior Member
  
Join Date: Jan 2004
Posts: 20
Default
I do have a DHCP connection to my WAN, but it's on ETH1 (if I remember correctly).
Reply With Quote
  #13 (permalink)  
Old 06-09-2009, 10:26 PM
Moderator
  
Join Date: Jul 2001
Location: southern California
Posts: 5,135
Default
Guido, what kind of internet connection do you have?

Thanks,
Barry
__________________
http://DealBert.net
Home & business end-user since v1.x
  • ASL 6.3x, HP DL145 Dual Opteron, 1GB RAM, 6 gigE NICs, 50-IP Platinum License
  • ASL 7.3x, Dell PE1550 Dual PIII 1GHz, 1GB RAM, 2 NICs, 50-IP Platinum License
  • ASL 7.5x, 17-watt fanless mini-ITX system: MSI IM-945GSE-A Atom n270, 2GB RAM, Morex T3310 case. 2 Intel GigE, 3 VLANs. 80G 5200rpm 2.5" HD
    Netgear GS108T gigE VLAN switch & Linksys WRT54G WAP
    Total network infrastructure: 27 watts. 100-IP Home User. FiOS 10mb/2mb
Reply With Quote
  #14 (permalink)  
Old 06-09-2009, 10:32 PM
Junior Member
  
Join Date: Jan 2004
Posts: 20
Default
Comcast cable modem.
Reply With Quote
  #15 (permalink)  
Old 06-09-2009, 10:36 PM
Junior Member
  
Join Date: Jan 2004
Posts: 20
Default
And I forgot, I changed out my NICs a while back.

My system is built on a dual Opteron Tyan Thunder K8SE motherboard.
thunderK8SE

I'm using the built in NICs, on board the motherboard....

Integrated LAN Controller
• One Broadcom BCM5704C dual-ch GbE
- Two RJ-45 LAN connectors with LEDs
- Connected to PCI-X Bridge B
- Two Front Panel LED headers
• One Intel® 82551QM 10/100Mbps LAN controller
- One RJ-45 LAN connectors with LEDs, stacked
on rear two USB 2.0 ports
- Connected to 32bit/33MHz PCI 2.3 bus
- One Front Panel LED header
Reply With Quote
  #16 (permalink)  
Old 06-09-2009, 10:47 PM
Moderator
  
Join Date: Jul 2001
Location: southern California
Posts: 5,135
Default
I've opened a support case with Astaro about this, via my.astaro.com
(Ticket#2009060910001133 / CaseID 00099165)

Also, I got a Private Message from another user with the same problem; I asked him to post here also.

Barry
__________________
http://DealBert.net
Home & business end-user since v1.x
  • ASL 6.3x, HP DL145 Dual Opteron, 1GB RAM, 6 gigE NICs, 50-IP Platinum License
  • ASL 7.3x, Dell PE1550 Dual PIII 1GHz, 1GB RAM, 2 NICs, 50-IP Platinum License
  • ASL 7.5x, 17-watt fanless mini-ITX system: MSI IM-945GSE-A Atom n270, 2GB RAM, Morex T3310 case. 2 Intel GigE, 3 VLANs. 80G 5200rpm 2.5" HD
    Netgear GS108T gigE VLAN switch & Linksys WRT54G WAP
    Total network infrastructure: 27 watts. 100-IP Home User. FiOS 10mb/2mb
Reply With Quote
  #17 (permalink)  
Old 06-09-2009, 10:54 PM
Junior Member
  
Join Date: Jan 2004
Posts: 20
Default
I hope they figure something out. I guess I better dig out that old LinkSys router for the time being, haha.
Reply With Quote
  #18 (permalink)  
Old 06-09-2009, 11:00 PM
Moderator
  
Join Date: Jul 2001
Location: southern California
Posts: 5,135
Default
Or copy a backup off of the firewall, and re-install 7.402 from ISO.
My switch needs Astaro for the VLANs, so my Linksys isn't a good drop-in replacement for the fw.

Barry
__________________
http://DealBert.net
Home & business end-user since v1.x
  • ASL 6.3x, HP DL145 Dual Opteron, 1GB RAM, 6 gigE NICs, 50-IP Platinum License
  • ASL 7.3x, Dell PE1550 Dual PIII 1GHz, 1GB RAM, 2 NICs, 50-IP Platinum License
  • ASL 7.5x, 17-watt fanless mini-ITX system: MSI IM-945GSE-A Atom n270, 2GB RAM, Morex T3310 case. 2 Intel GigE, 3 VLANs. 80G 5200rpm 2.5" HD
    Netgear GS108T gigE VLAN switch & Linksys WRT54G WAP
    Total network infrastructure: 27 watts. 100-IP Home User. FiOS 10mb/2mb
Reply With Quote
  #19 (permalink)  
Old 06-10-2009, 12:46 AM
Moderator
  
Join Date: Jul 2001
Location: southern California
Posts: 5,135
Default
For those of you who still have 7.403 installed and not working, Astaro support suggests trying a static IP on the external interface (use the same IP as you normally are getting with DHCP).

If that works, Astaro would like SSH access into the box.

I can't afford to try 7.403 again right now, but may later.

Barry
__________________
http://DealBert.net
Home & business end-user since v1.x
  • ASL 6.3x, HP DL145 Dual Opteron, 1GB RAM, 6 gigE NICs, 50-IP Platinum License
  • ASL 7.3x, Dell PE1550 Dual PIII 1GHz, 1GB RAM, 2 NICs, 50-IP Platinum License
  • ASL 7.5x, 17-watt fanless mini-ITX system: MSI IM-945GSE-A Atom n270, 2GB RAM, Morex T3310 case. 2 Intel GigE, 3 VLANs. 80G 5200rpm 2.5" HD
    Netgear GS108T gigE VLAN switch & Linksys WRT54G WAP
    Total network infrastructure: 27 watts. 100-IP Home User. FiOS 10mb/2mb
Reply With Quote
  #20 (permalink)  
Old 06-10-2009, 12:53 AM
Member
  
Join Date: Feb 2002
Location: lognes
Posts: 55
Default
have same problem here , after upgrade 7.403 , dhcp cable modem are up and down.
all working fine on previous 7.403.
have made update from regulare update system.
maybe need another update to fix this problem.
__________________
Abilio
Astaro 7.402 PROFESSIONAL AND POWER LICENSE)
Reply With Quote
Reply
Page 2 of 6 1 2 34 Last »

« Previous Thread | Next Thread »
Thread Tools
Display Modes
Linear Mode Linear Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


All times are GMT. The time now is 12:16 AM.

 
Contact Us - Astaro User Bulletin Board - Archive - Top

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2010, Jelsoft Enterprises Ltd.


These pages are specifically maintained for the discussion of firewall issues within the Open Source community, and might already reflect new alpha/beta releases under development. Please refer to our product specifications for the functionality of the actual release. Discussions of new/enhanced functionality does not constitute a commitment of Astaro, to integrate this functionality into future releases. issues within the Open Source community, and might already reflect new alpha/beta releases under development. Please refer to our product specifications for the functionality of the actual release. Discussions of new/enhanced functionality does not constitute a commitment of Astaro, to integrate this functionality into future releases.