Astaro User Bulletin Board
Go Back   Astaro User Bulletin Board > Astaro Gateway Products > Management, Networking, Logging and Reporting
Reload this Page 2 Lines different Networks Message Not more than 1 Gateway
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read

Welcome to the Astaro User Bulletin Board.
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Page 2 of 2 1 2
Reply
 
LinkBack Thread Tools Display Modes
  #11 (permalink)  
Old 06-30-2009, 10:38 AM
Junior Member
  
Join Date: May 2009
Posts: 12
Default
Hi,

thanks for your help... Now it works.
But i have another config then the linked Article...

I have a policy Routing, thats correct but i have the following:

Source Interface: WAN2 (2nd public Net)
Source: Any
Service: Any
Destination: Any
Target: 2nd Default Gateway

What can i define with source?
In the link is written "The source Network"

But the source Network is here any because any Internetusers should open the Webservers... When i define, that Destination is the Servers outside public IP address that doesn't work... The Destionation must be any...

I thing, i know why. In the Routingtable it will be add as "default via"
This is like the standard Gateway... But what should i define as Source...

In my opionion it can only be any...

Is there any securityproblem in this route?
I thing there is not, becuae all Traffic is routed by the WAN2 Interface...
Reply With Quote
  #12 (permalink)  
Old 06-30-2009, 02:01 PM
BAlfson's Avatar
Moderator
  
Join Date: Mar 2007
Location: Oklahoma City
Posts: 5,388
Default
I'm lost. Maybe a diagram?

Cheers - Bob
__________________
ACE V7 - Astaro Preferred Partner since V3
Addicted to my iPhone!
Reply With Quote
Reply
Page 2 of 2 1 2

« Previous Thread | Next Thread »
Thread Tools
Display Modes
Linear Mode Linear Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


All times are GMT. The time now is 04:56 AM.

 
Contact Us - Astaro User Bulletin Board - Archive - Top

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2010, Jelsoft Enterprises Ltd.


These pages are specifically maintained for the discussion of firewall issues within the Open Source community, and might already reflect new alpha/beta releases under development. Please refer to our product specifications for the functionality of the actual release. Discussions of new/enhanced functionality does not constitute a commitment of Astaro, to integrate this functionality into future releases. issues within the Open Source community, and might already reflect new alpha/beta releases under development. Please refer to our product specifications for the functionality of the actual release. Discussions of new/enhanced functionality does not constitute a commitment of Astaro, to integrate this functionality into future releases.