I am using Astaro Security Gateway Firmware version: 7.402
I try to port forward:
My Internet address is 87.246.7.30
My Gate address is 192.168.111.230
My Server address is 192.168.111.202
I want to reach port 3299 on my server from 194.9.7.17

I create Network Security » Packet Filter
Source: Name: VBS
Type:Host
Address:194.9.7.17
Interface: Any
Comment:SapRouterVBS

Service: Any

Destination:
Source: Name: R3Send
Type:Host
Address:192.168.111.202
Interface: Internal
Comment:

i have two rules on Network Security » Packet Filter
My first rules is VBS ---->Any--->rR3send
Second is Any----->Any---->Any

Please tell me what i must do to solve my problem
this is my Live Log: Packet filter
13:36:56 Default DROP TCP 194.9.7.17 : 45985
→ 87.246.7.30 : 3299
[SYN] len=48 ttl=117 tos=0x08 srcmac=00:00:00:00:00:00 dstmac=00:1e:8c:5a:5d:ec


13:36:58 Default DROP TCP 194.9.7.17 : 45985
→ 87.246.7.30 : 3299
[SYN] len=48 ttl=117 tos=0x08 srcmac=00:00:00:00:00:00 dstmac=00:1e:8c:5a:5d:ec


13:37:04 Default DROP TCP 194.9.7.17 : 45985
→ 87.246.7.30 : 3299
[SYN] len=48 ttl=117 tos=0x08 srcmac=00:00:00:00:00:00 dstmac=00:1e:8c:5a:5d:ec

dstmac is mac on my WAN Card ot Astaro Gateway

Did u setup a DNAT-rule for that server?

No Please tell me how to look DNAT rull for that case

Delete both packet filter rules.

'Network Security >> NAT' 'DNAT/SNAT' tab

Traffic Source: VBS
Traffic Service: Any
Traffic Destination: External (Address)

NAT mode: DNAT (Destination)

Destination: R3Send
Destination Service: [leave empty]

Automatic packet filter rule: [checked]

This will redirect all traffic from VBS to R3Send; is that what you want?

Cheers - Bob

__________________
ACE V7 - Astaro Preferred Partner since V3
Addicted to my iPhone!

Thanks for all