hi,

I'm trying to get remote access via IPSec setup and working. The link is successfully establish.The issue is the ip pool that was given to the remote user which is different to the default astaro ipsec vpn ip pool.
ipsec vpn ip pool = 10.242.4.0/0
ip pool that was given = 192.168.254.0/0

Using ASC_latest.
here is the logs .

11/11/2009 1:42:34 PM IpSrcRange=[10.136.0.212-10.136.0.212],IpDstRange=[10.136.0.0-10.136.0.255],IpProt=0,SrcPortRange=[0-65535],DstPortRange=[0-65535]
11/11/2009 1:42:34 PMIPSec: connected: LifeDuration in Seconds = 2520 and in KiloBytes = 0
11/11/2009 1:42:34 PMIPSec: Connected to REF_IaBiXNPyaj on channel 1.
11/11/2009 1:42:34 PMPPP(Ipcp): connected to REF_IaBiXNPyaj with IP Address: 192.168.254.002. : 192.168.254.003.
11/11/2009 1:42:34 PMSUCCESS: IpSec connection ready
11/11/2009 1:42:43 PMSUCCESS: Link -> <REF_IaBiXNPyaj> IP address assigned to IP stack - link is operational.

any suggestions ? any help is much appreciated?

thanks

Hi, which version of Astaro, and what VPN client and OS are used?

Barry

__________________
http://DealBert.net
Home & business end-user since v1.x

• ASL 6.3x, HP DL145 Dual Opteron, 1GB RAM, 6 gigE NICs, 50-IP Platinum License
  
• ASL 7.3x, Dell PE1550 Dual PIII 1GHz, 1GB RAM, 2 NICs, 50-IP Platinum License
  
• ASL 7.5x, 17-watt fanless mini-ITX system: MSI IM-945GSE-A Atom n270, 2GB RAM, Morex T3310 case. 2 Intel GigE, 3 VLANs. 80G 5200rpm 2.5" HD
  Netgear GS108T gigE VLAN switch & Linksys WRT54G WAP
  Total network infrastructure: 27 watts. 100-IP Home User. FiOS 10mb/2mb

hi,

asg 220, firmware 7.501 using the ASC_latest and windows xp pro.

I dont have any idea where this 192.168.254.0 came from.


thanks

I to am experiencing this issue

The static RAS IP can currently only be assigned with x509 IPsec remote access connections. If PSK is used the IP the client proposes is accepted whatever it is.

This will change in the upcoming ASG V8 where we'll support IP pools as with the other remote access methods.