Astaro User Bulletin Board
Go Back   Astaro User Bulletin Board > Closed Forums (read only) > ASG V7.400 BETA (closed)
Reload this Page [CONFIRMED] [7.350] Snmpd errors
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read

Welcome to the Astaro User Bulletin Board.
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Page 1 of 2 1 2
 
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old 11-22-2008, 08:51 PM
Monarch's Avatar
Wizard
  
Join Date: Apr 2008
Location: Rottweil, Germany
Posts: 582
Default [CONFIRMED] [7.350] Snmpd errors
I'm recieving approximately 1 error mail per hour which says

[INFO-116] Snmpd daemon not running - restarted

In the selfmonitoring log there are lots of entries where the snmpd is restarted over and over.

Regards,
Bastian
__________________

Running Astaro ASG virtual appliance / Home power user 100 IP license
Intel S3210SHLC / Intel Xeon X3320 / 8192 MB RAM / 3Ware 9650SE 8-Port / APC Smart-UPS 750XL
  #2 (permalink)  
Old 11-22-2008, 10:04 PM
Senior Member
  
Join Date: Sep 2007
Posts: 163
Default
How does you utilization look? I had an issue and had to reboot to fix it.
  #3 (permalink)  
Old 11-23-2008, 01:37 PM
Monarch's Avatar
Wizard
  
Join Date: Apr 2008
Location: Rottweil, Germany
Posts: 582
Default
I didn't notice any changes in either cpu or memory utilization from 7.305 to 7.500 so far.

I had also to reboot an hour ago because my PPPoE connection failed for some reason. I'll see whether the snmpd errors will continue or not...
__________________

Running Astaro ASG virtual appliance / Home power user 100 IP license
Intel S3210SHLC / Intel Xeon X3320 / 8192 MB RAM / 3Ware 9650SE 8-Port / APC Smart-UPS 750XL
  #4 (permalink)  
Old 11-23-2008, 04:28 PM
Senior Member
  
Join Date: Sep 2007
Posts: 163
Default
Sorry couldn't post back. After I had said what I said I noticed I am getting the same issue. I don't know if it relates back to my original or not. I had real high cpu with the first couple reboots from snmpd.


Thanks
  #5 (permalink)  
Old 11-23-2008, 06:31 PM
Monarch's Avatar
Wizard
  
Join Date: Apr 2008
Location: Rottweil, Germany
Posts: 582
Default
Here is an excerpt of the selfmonitoring log:

Code:
008:11:23-19:01:18 (none) selfmonng[3069]: W triggerAction: 'cmd'
2008:11:23-19:01:18 (none) selfmonng[3069]: W actionCmd(+):  '/var/mdw/scripts/snmpd restart'
2008:11:23-19:01:18 (none) selfmonng[3069]: W child returned status: exit='0' signal='0'
2008:11:23-19:01:53 (none) selfmonng[3069]: I check Failed increment snmpd_running counter 1 - 3
2008:11:23-19:01:58 (none) selfmonng[3069]: I check Failed increment snmpd_running counter 2 - 3
2008:11:23-19:02:03 (none) selfmonng[3069]: W check Failed increment snmpd_running counter 3 - 3
2008:11:23-19:02:03 (none) selfmonng[3069]: W NOTIFYEVENT Name=snmpd_running Level=INFO Id=116 suppressed
2008:11:23-19:02:03 (none) selfmonng[3069]: W triggerAction: 'cmd'
2008:11:23-19:02:03 (none) selfmonng[3069]: W actionCmd(+):  '/var/mdw/scripts/snmpd restart'
2008:11:23-19:02:04 (none) selfmonng[3069]: W child returned status: exit='0' signal='0'
2008:11:23-19:02:39 (none) selfmonng[3069]: I check Failed increment snmpd_running counter 1 - 3
2008:11:23-19:02:44 (none) selfmonng[3069]: I check Failed increment snmpd_running counter 2 - 3
2008:11:23-19:02:49 (none) selfmonng[3069]: W check Failed increment snmpd_running counter 3 - 3
2008:11:23-19:02:49 (none) selfmonng[3069]: W NOTIFYEVENT Name=snmpd_running Level=INFO Id=116 suppressed
2008:11:23-19:02:49 (none) selfmonng[3069]: W triggerAction: 'cmd'
2008:11:23-19:02:49 (none) selfmonng[3069]: W actionCmd(+):  '/var/mdw/scripts/snmpd restart'
2008:11:23-19:02:49 (none) selfmonng[3069]: W child returned status: exit='0' signal='0'
2008:11:23-19:03:24 (none) selfmonng[3069]: I check Failed increment snmpd_running counter 1 - 3
2008:11:23-19:03:29 (none) selfmonng[3069]: I check Failed increment snmpd_running counter 2 - 3
2008:11:23-19:03:34 (none) selfmonng[3069]: W check Failed increment snmpd_running counter 3 - 3
2008:11:23-19:03:34 (none) selfmonng[3069]: Snmpd daemon not running - restarted
2008:11:23-19:03:34 (none) selfmonng[3069]: W NOTIFYEVENT Name=snmpd_running Level=INFO Id=116 sent
And here's the system messages log:
Code:
2008:11:23-19:30:45 (none) snmpd[24105]: NET-SNMP version 5.4.1
2008:11:23-19:31:01 (none) /usr/sbin/cron[24121]: (root) CMD (/sbin/audld.plx)
2008:11:23-19:31:15 (none) snmpd[24105]: error on subcontainer 'ia_addr' insert (-1)
2008:11:23-19:31:15 (none) snmpd[24105]: error on subcontainer '' insert (-1)
2008:11:23-19:31:31 (none) snmpd[24159]: netsnmp_assert !"registration != duplicate" failed agent_registry.c:535 netsnmp_subtree_load()
2008:11:23-19:31:31 (none) snmpd[24159]: netsnmp_assert !"registration != duplicate" failed agent_registry.c:535 netsnmp_subtree_load()
2008:11:23-19:31:31 (none) snmpd[24159]: netsnmp_assert !"registration != duplicate" failed agent_registry.c:535 netsnmp_subtree_load()
2008:11:23-19:31:31 (none) snmpd[24159]: error on subcontainer 'ia_addr' insert (-1)
2008:11:23-19:31:31 (none) snmpd[24159]: couldn't map value 0 for ipAddressAddrType
__________________

Running Astaro ASG virtual appliance / Home power user 100 IP license
Intel S3210SHLC / Intel Xeon X3320 / 8192 MB RAM / 3Ware 9650SE 8-Port / APC Smart-UPS 750XL
Last edited by Monarch; 11-23-2008 at 06:32 PM. Reason: Added system messages
  #6 (permalink)  
Old 11-26-2008, 04:40 PM
Monarch's Avatar
Wizard
  
Join Date: Apr 2008
Location: Rottweil, Germany
Posts: 582
Default
*push*

Any news on this error? These mails become quite annoying
__________________

Running Astaro ASG virtual appliance / Home power user 100 IP license
Intel S3210SHLC / Intel Xeon X3320 / 8192 MB RAM / 3Ware 9650SE 8-Port / APC Smart-UPS 750XL
  #7 (permalink)  
Old 11-27-2008, 11:10 AM
Senior Member
  
Join Date: Aug 2003
Location: wierden (NL)
Posts: 167
Default
Hi it seems that i have the same error. i get emails all day...

Snmp daemon not running - restarted

--
System Uptime : 3 days 14 hours 13 minutes
System Load : 0.28
System Version : Astaro Security Gateway Appliance 7.350

Please refer to the manual for detailed instructions.
  #8 (permalink)  
Old 11-27-2008, 03:46 PM
Senior Member
  
Join Date: Nov 2008
Posts: 169
Default
Yes, snmpd is really unstable in 7.350 will confirm this.
__________________
Astaro AG
  #9 (permalink)  
Old 12-03-2008, 06:10 PM
Monarch's Avatar
Wizard
  
Join Date: Apr 2008
Location: Rottweil, Germany
Posts: 582
Default
Should that be fixed in 7.360?

After installing the new release I'm still in the same situation:

Code:
2008:12:03-19:06:48 (none) selfmonng[3048]: Snmpd daemon not running - restarted
2008:12:03-19:06:48 (none) selfmonng[3048]: W NOTIFYEVENT Name=snmpd_running Level=INFO Id=116 sent
2008:12:03-19:06:48 (none) selfmonng[3048]: W triggerAction: 'cmd'
2008:12:03-19:06:48 (none) selfmonng[3048]: W actionCmd(+): '/var/mdw/scripts/snmpd restart'
2008:12:03-19:06:56 (none) selfmonng[3048]: W child returned status: exit='0' signal='0'
2008:12:03-19:07:06 (none) selfmonng[3048]: I check Failed increment ntpd_running counter 1 - 3
2008:12:03-19:07:31 (none) selfmonng[3048]: I check Failed increment snmpd_running counter 1 - 3
2008:12:03-19:07:36 (none) selfmonng[3048]: I check Failed increment snmpd_running counter 2 - 3
2008:12:03-19:07:41 (none) selfmonng[3048]: W check Failed increment snmpd_running counter 3 - 3
2008:12:03-19:07:41 (none) selfmonng[3048]: W NOTIFYEVENT Name=snmpd_running Level=INFO Id=116 suppressed
2008:12:03-19:07:41 (none) selfmonng[3048]: W triggerAction: 'cmd'
2008:12:03-19:07:41 (none) selfmonng[3048]: W actionCmd(+): '/var/mdw/scripts/snmpd restart'
2008:12:03-19:07:42 (none) selfmonng[3048]: W child returned status: exit='0' signal='0'
2008:12:03-19:08:17 (none) selfmonng[3048]: I check Failed increment snmpd_running counter 1 - 3
2008:12:03-19:08:22 (none) selfmonng[3048]: I check Failed increment snmpd_running counter 2 - 3
2008:12:03-19:08:27 (none) selfmonng[3048]: W check Failed increment snmpd_running counter 3 - 3
2008:12:03-19:08:27 (none) selfmonng[3048]: W NOTIFYEVENT Name=snmpd_running Level=INFO Id=116 suppressed
2008:12:03-19:08:27 (none) selfmonng[3048]: W triggerAction: 'cmd'
2008:12:03-19:08:27 (none) selfmonng[3048]: W actionCmd(+): '/var/mdw/scripts/snmpd restart'
2008:12:03-19:08:28 (none) selfmonng[3048]: W child returned status: exit='0' signal='0'
__________________

Running Astaro ASG virtual appliance / Home power user 100 IP license
Intel S3210SHLC / Intel Xeon X3320 / 8192 MB RAM / 3Ware 9650SE 8-Port / APC Smart-UPS 750XL
  #10 (permalink)  
Old 12-12-2008, 01:52 PM
Member
  
Join Date: Jul 2008
Location: Lisboa
Posts: 36
Default
Hi, in 7.380 the problem still continues every 1 hr.

Snmp daemon not running - restarted

--
System Uptime : 0 days 4 hours 35 minutes
System Load : 0.00
System Version : Astaro Security Gateway Software 7.380
__________________
Jorge Gomes
Lisboa - Portugal
 
Page 1 of 2 1 2

Tags
snmpd

« Previous Thread | Next Thread »
Thread Tools
Display Modes
Linear Mode Linear Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


All times are GMT. The time now is 12:39 PM.

 
Contact Us - Astaro User Bulletin Board - Archive - Top

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2010, Jelsoft Enterprises Ltd.


These pages are specifically maintained for the discussion of firewall issues within the Open Source community, and might already reflect new alpha/beta releases under development. Please refer to our product specifications for the functionality of the actual release. Discussions of new/enhanced functionality does not constitute a commitment of Astaro, to integrate this functionality into future releases. issues within the Open Source community, and might already reflect new alpha/beta releases under development. Please refer to our product specifications for the functionality of the actual release. Discussions of new/enhanced functionality does not constitute a commitment of Astaro, to integrate this functionality into future releases.