Astaro User Bulletin Board
Go Back   Astaro User Bulletin Board > Closed Forums (read only) > ASG V7 Betas > ASG V7.500 BETA (closed)
Reload this Page [7.470][BUG][FIXED] Inconsistence in bandwith monitor
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read

Welcome to the Astaro User Bulletin Board.
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Page 1 of 2 1 2
 
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old 07-10-2009, 09:06 PM
Monarch's Avatar
Wizard
  
Join Date: Apr 2008
Location: Rottweil, Germany
Posts: 681
Default [7.470] Inconsistence in bandwith monitor
Hi,

please look at the following screenshot. While the monitor for the single interface shows some connections, the monitor over all interaces doesn't show anything at the same moment:



Regards,
Bastian
__________________

Running Astaro ASG Version 8.001 / Astaro wireless AP10 / Home power user 100 IP license
Secondary ASG V7.506 for using AP10
Intel S3210SHLC / Intel Xeon X3320 / 8192 MB RAM / 3Ware 9650SE 8-Port / APC Smart-UPS 750XL
  #2 (permalink)  
Old 07-10-2009, 09:08 PM
 
Join Date: Jun 2009
Posts: 0
Default
Code:
Astaro Beta Report
--------------------------------
Version: 7.470
Type: BUG
State: FIXED
Reporter: Monarch
Contributor: 
MantisID: 10903
--------------------------------
Last edited by andyk007; 07-15-2009 at 08:56 AM.
  #3 (permalink)  
Old 07-10-2009, 09:58 PM
Billybob's Avatar
Wizard
  
Join Date: Jul 2006
Location: United States
Posts: 898
Default
Very nice catch. I had seen the monitor under packet filter-->advanced and was confused as to why it was there. Didn't notice that it was for all interfaces.
  #4 (permalink)  
Old 07-10-2009, 10:21 PM
Moderator
  
Join Date: Jul 2001
Location: southern California
Posts: 5,461
Default
Hi, I'm not seeing a screenshot or attachment.

Barry
__________________
http://DealBert.net
Home & business end-user since v1.x
  • ASL 6.3x, HP DL145 Dual Opteron, 1GB RAM, 6 gigE NICs, 50-IP Platinum License
  • ASL 7.5x, HP DL360G5, Xeon 5160, 3GB, RAID, gigE NICs, 50-IP Platinum License
  • ASL 7.5x, 17-watt fanless mini-ITX system: MSI IM-945GSE-A Atom n270, 2GB RAM, Morex T3310 case. 2 Intel GigE, 3 VLANs. 80G 5200rpm 2.5" HD
    Netgear GS108T gigE VLAN switch & Linksys WRT54G WAP
    Total network infrastructure: 27 watts. 100-IP Home User. FiOS 10mb/2mb
  #5 (permalink)  
Old 07-10-2009, 10:23 PM
Monarch's Avatar
Wizard
  
Join Date: Apr 2008
Location: Rottweil, Germany
Posts: 681
Default
I use a free image upload service for inbound pictures in my postings.

Direct link to the image: http://666kb.com/i/bajaw8liixwve219t.jpg

Perhaps the URL is blocked by your ASG, Barry?
__________________

Running Astaro ASG Version 8.001 / Astaro wireless AP10 / Home power user 100 IP license
Secondary ASG V7.506 for using AP10
Intel S3210SHLC / Intel Xeon X3320 / 8192 MB RAM / 3Ware 9650SE 8-Port / APC Smart-UPS 750XL
Last edited by Monarch; 07-10-2009 at 10:25 PM.
  #6 (permalink)  
Old 07-10-2009, 11:32 PM
RFCat_vk's Avatar
Wizard
  
Join Date: Aug 2005
Location: Victoria, Australia
Posts: 3,010
Default
Hi,
the snapshots show up. At least you can get data displayed.

Ian M
__________________
Home User licence - v8.0xx - AMD X2 5050e (45w CPU) with 4gb (idles at 37w),1 intel NIC, the onboard NIC and netgear gs108t with vlans
Home user licence - v7.507 -Intel N330 to run Astaro AP 30. Connected to internet via V8.001 ASG
Work essentials licence - v8.0xx - intel D with 1.5gb.
  #7 (permalink)  
Old 07-10-2009, 11:39 PM
Moderator
  
Join Date: Jul 2001
Location: southern California
Posts: 5,461
Default
Quote:
Originally Posted by Monarch View Post
I use a free image upload service for inbound pictures in my postings.

Direct link to the image: http://666kb.com/i/bajaw8liixwve219t.jpg

Perhaps the URL is blocked by your ASG, Barry?
when I click on that, I get
"Forbidden

You don't have permission to access /i/bajaw8liixwve219t.jpg on this server."

Barry
__________________
http://DealBert.net
Home & business end-user since v1.x
  • ASL 6.3x, HP DL145 Dual Opteron, 1GB RAM, 6 gigE NICs, 50-IP Platinum License
  • ASL 7.5x, HP DL360G5, Xeon 5160, 3GB, RAID, gigE NICs, 50-IP Platinum License
  • ASL 7.5x, 17-watt fanless mini-ITX system: MSI IM-945GSE-A Atom n270, 2GB RAM, Morex T3310 case. 2 Intel GigE, 3 VLANs. 80G 5200rpm 2.5" HD
    Netgear GS108T gigE VLAN switch & Linksys WRT54G WAP
    Total network infrastructure: 27 watts. 100-IP Home User. FiOS 10mb/2mb
  #8 (permalink)  
Old 07-11-2009, 12:09 AM
Monarch's Avatar
Wizard
  
Join Date: Apr 2008
Location: Rottweil, Germany
Posts: 681
Default
Hm, strange. I put it on my home server here:



Good luck with this one
__________________

Running Astaro ASG Version 8.001 / Astaro wireless AP10 / Home power user 100 IP license
Secondary ASG V7.506 for using AP10
Intel S3210SHLC / Intel Xeon X3320 / 8192 MB RAM / 3Ware 9650SE 8-Port / APC Smart-UPS 750XL
Last edited by Monarch; 07-11-2009 at 12:16 AM.
  #9 (permalink)  
Old 07-11-2009, 01:32 AM
Moderator
  
Join Date: Jul 2001
Location: southern California
Posts: 5,461
Default
OK... I can see it now.

BTW, you can upload images to these forums (as attachments).

Barry
__________________
http://DealBert.net
Home & business end-user since v1.x
  • ASL 6.3x, HP DL145 Dual Opteron, 1GB RAM, 6 gigE NICs, 50-IP Platinum License
  • ASL 7.5x, HP DL360G5, Xeon 5160, 3GB, RAID, gigE NICs, 50-IP Platinum License
  • ASL 7.5x, 17-watt fanless mini-ITX system: MSI IM-945GSE-A Atom n270, 2GB RAM, Morex T3310 case. 2 Intel GigE, 3 VLANs. 80G 5200rpm 2.5" HD
    Netgear GS108T gigE VLAN switch & Linksys WRT54G WAP
    Total network infrastructure: 27 watts. 100-IP Home User. FiOS 10mb/2mb
  #10 (permalink)  
Old 07-11-2009, 09:51 AM
Wizard
  
Join Date: Dec 2006
Posts: 655
Default
thanks for the description. I forwarded it to R&D

Greetings
Andreas
 
Page 1 of 2 1 2

« Previous Thread | Next Thread »
Thread Tools
Display Modes
Linear Mode Linear Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


All times are GMT. The time now is 07:53 AM.

 
Contact Us - Astaro User Bulletin Board - Archive - Top

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2010, Jelsoft Enterprises Ltd.


These pages are specifically maintained for the discussion of firewall issues within the Open Source community, and might already reflect new alpha/beta releases under development. Please refer to our product specifications for the functionality of the actual release. Discussions of new/enhanced functionality does not constitute a commitment of Astaro, to integrate this functionality into future releases. issues within the Open Source community, and might already reflect new alpha/beta releases under development. Please refer to our product specifications for the functionality of the actual release. Discussions of new/enhanced functionality does not constitute a commitment of Astaro, to integrate this functionality into future releases.