Hi All,

I've defined the DynDns config as the attached picture and the Uplink Balacing config as the another attached picture also.

As you can see in the DynDns config I set the Assign as "first public IP on the default route".

The issue is that the DynDns get only the IP of the 03 link of the Uplink Balancing, if I change the order of the links the issue continue.

I need the DynDNs get the IP of the link following the below order:

01
02 if 01 failure
03 if 01 and 02 failure

How can I set correctly ?

Thx.

Attached Images

	DynDns Config.png (14.9 KB, 18 views)
	Uplink Balance Config.png (50.9 KB, 23 views)

Hi, please post the version # of Astaro that you are running.

Barry

__________________
http://JobOyster.com
http://DealBert.net
End-user since v1.x

• ASL 8.3x, HP DL145, 1GB RAM, 6 gigE NICs, 50-IP Platinum License
  
• ASL 7.5x, HP DL360G5, Xeon 5160, 3GB, RAID, gigE NICs, 50-IP Platinum License
  
• ASL 9.0x, 17-watt fanless mini-ITX system: MSI IM-945GSE-A Atom n270, 2GB RAM, Morex T3310 case. 2 Intel GigE, 3 VLANs. 80G 5200rpm 2.5" HD.
  Netgear GS108T gigE VLAN switch & Astaro AP30 Access Point with VLANs.
  100-IP Home Power User License. 15/5mbit FiOS internet.

Hi BarryG thx by your answer.

Please find below:

Firmware version: 9.004-34
Pattern version: 41272

Marc M

A very interesting question, Marc. Is this a commercial license so that you can pose the question to Sophos Support?

Cheers - Bob

__________________
ACE V7 - Astaro Preferred Partner since V3
Sophos Gold Solution Partner
www.MediaSoftUSA.com
Addicted to my iPhone!

Hi Bob yes its a comercial license I dont use the support before because all of my questions was successfully answered by thia forum.

Do you know something about this problem ?

Marc

I would think that it's unusual to want to do this - I don't know if it's possible.

Maybe you could tell us "why" you want to do this. Maybe someone would have a more-reliable approach with the ASG/UTM.

Cheers - Bob

__________________
ACE V7 - Astaro Preferred Partner since V3
Sophos Gold Solution Partner
www.MediaSoftUSA.com
Addicted to my iPhone!

Hi Bob, this probem started after I add the thirth wan, when I had 2 wans its works fine..

You definitely should have your reseller submit a Support ticket for this.

Also, please say the reason you want to do this. What problem are you trying to solve?

Cheers - Bob

__________________
ACE V7 - Astaro Preferred Partner since V3
Sophos Gold Solution Partner
www.MediaSoftUSA.com
Addicted to my iPhone!

Please try these settings for DynDNS:

assign: 'IP of local interface'
interface: 'uplink interfaces'

__________________
"Datenautobahn: Einrichtung zur schnellen Übertragung großer Datenmengen (z.B. über das Telefonnetz)" (DUDEN, 21. Auflage)

Mario Schmidt
Lead Test Automation Engineer

Hi trollvottel, thx for your answer.

I try your suggest its works perfect, but for our environment will not be apply because one of our routers delivery an 192.168.xx IP to the Astaro, if I use your suggest when this link that get a local IP assume the Uplink Interfaces the REDs cannot be contact the ASG because the DynDNS will add the local IP of the hostname used by the REDs.

I really think to contact the telecom provider to change this configs and make the router delivery a public IP to the Astaro for use your suggest.

But this is a very delay thing to do with the telecom provider.

Thanks in advance if you or anyone have another suggest.

I think one thing now, we start to use Multipah Rules some days ago, may be Multipath Rules can be direction of the DynDNS connection by one Interface ?

One of the Multipath rules direct Web Surfing for one interface if fails to another one if fails to another one.

Can be the Multipath Rules my problem aboyt DynDns ?

thx.